Threading your Singer Stitch Sew Quick machine properly is⁤ crucial to ensure successful and hassle-free sewing projects. In ⁢this guide, we will ⁣walk you through the step-by-step process of⁣ threading this handy machine.

Step 1: Prepare the Machine

Before you start threading, make‌ sure ⁤your Singer Stitch Sew Quick‍ machine is turned off and unplugged⁣ for safety.

Step 2: Insert the Thread Spool

Take‌ your thread‍ spool and place it‍ onto the spool pin at the top of the machine. Make⁣ sure the spool rotates freely.

Step 3: Thread the Upper Thread

1. Take the end of your ‍thread and pass it through the thread ⁤guide located at the top of the machine.
2. Slide the ‌thread through the tension control dial from the right to the left.
3. Continue threading the upper thread, ⁣making sure it passes through the​ take-up lever mechanism. This helps with proper thread tension during ⁣sewing.
4. Finally, thread the⁢ needle from front to back. You can use a needle threader if necessary.

Step 4: Wind the Bobbin

Your Singer Stitch Sew Quick machine has a built-in bobbin winder. Wind your bobbin following the instructions provided in the machine’s manual. Once the ⁤bobbin is​ ready, place it into the bobbin case under the needle plate.

Step 5: Thread the Bobbin

1. Hold the end of your thread and pass it through the small hole in the edge of the bobbin.
2. Place the bobbin onto the bobbin winder spindle.
3. Push the bobbin winder toward the right-hand side to engage ⁣it.
4. Press the foot pedal gently to start winding the bobbin. Once done, cut the⁤ thread and remove the bobbin from the ⁤spindle.

Step 6: Bring Upper and Lower Threads Together

Hold the upper thread⁣ and turn the handwheel towards you to lower the needle and bring up the bobbin thread. Pull ​both threads gently towards the back of the ⁢machine.

You are now ready to start stitching with your Singer Stitch Sew Quick machine!

Remember‌ to consult your machine’s manual for⁤ any specific instructions and troubleshooting tips. Happy sewing!