How To Thread a Sewing Machine Bobbin – Singer
Step 1: Gather the necessary supplies
Before you begin threading the sewing machine bobbin, make sure you have the following supplies:
- A Singer sewing machine
- A bobbin
- A pair of scissors
Step 2: Prepare the bobbin
Start by preparing the bobbin. Take an empty bobbin and wind it with your desired thread. Make sure the thread is wound tightly and evenly.
Step 3: Insert the bobbin into the bobbin case
Locate the bobbin case on your Singer sewing machine. Open the case and insert the prepared bobbin into it. Ensure that the thread unwinds in the clockwise direction as specified by the machine’s instructions.
Step 4: Thread the bobbin thread through the machine
Now it’s time to thread the bobbin thread through the machine. Follow these steps:
- Hold the end of the thread and guide it through the small hole on the bobbin case.
- Pull the thread towards you, passing it through the tension spring.
- Continue pulling the thread until it reaches the notch and finally pull it upwards.
Step 5: Test and adjust the tension
After threading the bobbin, perform a test to ensure everything is set up properly. Insert the bobbin case back into the sewing machine and give the thread a light tug. It should move smoothly with a slight resistance. If the tension feels too loose or too tight, adjust the tension dial until it is suitable.
Step 6: You’re ready to sew!
Now that you have successfully threaded the sewing machine bobbin, you are ready to start sewing beautiful creations. Remember to regularly check and refill the bobbin as needed during your sewing projects.